Is it time to paint your windows in your Ann Arbor Michigan home? Are you lost and don’t know where to start? Then take a look at this guide on steps for preparing your windows to be painted in Ann Arbor Michigan. This guide will walk you through what you need to do to get your windows ready for painting. There are a few important steps you need to take before painting your windows and some people think you simply dive in and start painting, but that’s not the case. You first need to prepare your windows and then you can paint your windows. Take a look at this guide for the steps you need to take before painting the windows in your Ann Arbor Michigan home.
Steps for Preparing Your Windows to Be Painted in Ann Arbor Michigan
Step 1 – Cleaning Your Windows in Your Ann Arbor MI Home
The first step to preparing your windows to be painted in Ann Arbor Michigan is to clean your windows. You will need to use a vacuum with an extension to vacuum the window sills out. Vacuum out every window you are going to paint to remove all of the dust and debris. Once you have finished steps two and three, you will need to vacuum them out again to remove any debris that were left behind after completing those steps.
Step 2 – Removing Lose Caulking, Paint and Anything Else Lose on the Window
You will also need to go to each window and remove any lose caulking, paint and anything else that is hanging from the windows. This must be done so you can easily apply the paint to the windows. You can use a scraper or knife to remove the lose stuff.
Step 3 – Sanding the Windows in Your Ann Arbor MI Home
Once you have cleaned the windows out and removed anything that was hanging, you will need to go through and sand the windows with a piece of sand paper. This will help smooth out any rough areas on the windows. The smoother you can get the windows, the better the paint will look. Sanding the windows can be a job, but trust me, it will pay off in the long run. It will make your windows look a lot better. When you finish sanding your windows, make sure you repeat step one and vacuum the windows out again.
Step 4 – Caulking Crevices in Your Windows in Ann Arbor Michigan
The last step you will need to take when preparing your windows to be painted in Ann Arbor Michigan is to caulk crevices. There will probably be places in your windows that has holes especially if your windows are old. The best way to fix this is by caulking the crevices to fill the holes in. Once you have finished this step, you will be ready to move on.
After you have finished the above steps, you can move onto taping the windows so you don’t get paint on the glass. Make sure you take your time when you are painting your windows. If you need more information, tips and resources on home windows in Michigan, take a look at our blog at Home Windows Michigan.